Feature

　　An electric furnace transformer is used to supply power to an electric furnace, which lowers the high voltage to the furnace-required lower voltage.

　　Its type varies with the type of electric furnace, so the transformer has many types. Currently we manufacture following types: Arc furnace transformers used for steel-smelting (including load-ratio voltage regulator type, no-load voltage regulator type, and built-in reactor type); Blast furnace transformers used for smelting of iron alloy, silicides, calcium carbide (single phase, three phase, load ratio voltage regulator and no-load voltage regulator). All are energy-saving products with low power loss. The cooling modes are self-cooling mode, forced water cooling mode, etc.And we can also provide the special transformer by the customer's demands.

The Model Of The Electric Furnace Transformer Is Expressed As Follows:

　　Meaning:H---steel-smelting arc furnace,HJ-ladle fining furnace, HZ-electroslag furnace ,HC-calcium carbide furnace ,HK-blast furnace ,HG- industrial frequency furnace

　　Number of phases :D-single phases ,S-three phases,

　　Type of cooling devices: Oil immersed self-cooling - Air cooling F,Water cooling S

　　Way of oil circulation: Natural circulation , Forced oil circulation P

　　Way of voltage regulation :Non-excitation voltage regulation, Load ratio voltage regulation

　　Built-in accessories: Flux leakage changing group-,built-in reactor K

　　Rated capacity: KVA

　　Voltage class : KV